While we often discuss the many rules and regulations involved with 3D printing for the aviation industry, make no mistake: things are just as exacting when it comes to 3D printing for maritime applications, as well. French Naval Group, which specializes in naval defense and marine renewable energy, was the first to 3D print a full-scale propeller blade demonstrator for military use, and has now announced the creation of a next-generation 3D printed propeller that will power the French Navy’s Tripartite minehunter FS Andromède (M643) ship. Naval Group, which designed the metal propeller, manufactured it using wire arc additive manufacturing (WAAM) technology, which has been utilized in the past to print other propellers.
“The assembly of this 3D-printed propeller shows great promise for the future,” stated Eric Balufin, Director of the Naval Group site of Brest. “This new technology will enable us to considerably reduce technical constraints, and therefore allow for new manufacturing solutions for complex geometrical shapes which cannot be produced through conventional processes. It will also enable us to greatly reduce production time and consequently in-service support.”
Spanning 2.5 meters, the propeller weighs a whopping 1 metric ton, featuring five 220 kg 3D printed blades. WAAM, which is a better AM technique for large-scale applications, uses a robotic arm to melt metal wire that’s been heated up by an electric arc. The robots and other manufacturing tools for the work were supplied by the French subsidiary of the Yaskawa Group in Japan.
[#FABRICATIONADDITIVE] ⚓️ Naval Group équipe l’Andromède, un chasseur de mines tripartite de la @MarineNationale d’une hélice nouvelle génération réalisée grâce à la fabrication additive métallique. ⚙️ L’hélice va accompagner le navire dans toutes ses missions opérationnelles. pic.twitter.com/L4rkBmhhqj
— Naval Group (@navalgroup) January 13, 2021
As previously mentioned, there are pretty intense standards and requirements to be met with maritime 3D printing, such as corrosion, fatigue, and shock resistance, due to the difficult conditions ships constantly find themselves in. The Naval Group worked with Bureau Véritas to ensure that all of the certification, testing, and inspection requirements were met, so that the Fleet Support Services (FSS) and the French Defence Procurement Agency (DGA) would authorize a trial of the 3D printed blades on an actual Navy ship.
“Obtaining military naval quality requires rigorous development. Nearly three years of R&D – carried out by the Technical and Innovation Department in cooperation with the Ecole Centrale de Nantes within the framework of the LabCom Joint Laboratory of Maritime Technology – went into the development of the deposition process of metal wire fusion. Today, we witness a world first,” Emmanuel Chol, Director of the Naval Group’s Nantes-Indret site, said. “It is the largest metal 3D-printed thruster ever to have been manufactured and the first propeller resulting from this technology, embarked on board a military ship and manufactured for use beyond just sea trials.”
The 3D printed blades were successfully certified, and the propeller was transferred from the manufacturing site of Nantes-Indret to Brest this fall. The assembly was then sent to the submarine base, where it was mounted onto the intermediate propeller shaft of the French Navy ship Andromède in November. The ship is one of ten Tripartite mine hunters built in the 1980s for the French Navy, and eight of these, including the Andromède, won’t be retired for another ten years. So it’s imperative that the propeller and its 3D printed blades work properly.
Successful sea trials of the tripartite minehunter ship with its new propeller occurred in December, so the Andromède can now get back to work, along with its 3D printed propeller.
But Naval Group isn’t stopping there: it’s begun a new development phase with the purpose of revamping the design of other ships through the use of 3D printing, such as thrusters. The technology can offer increased part productivity, reduced weight, acoustic discretion, better thrust efficiency, and so much more.
(Sources: DefenseNews, Naval Group / Images courtesy of Naval Group unless otherwise noted)
If you're looking to get an architectural rendering quote in the USA, our service provides a simple and efficient process to obtain the best pricing tailored to your project. Through our platform, you can easily submit your project details and receive a competitive quote from our team of experts. We offer high-quality 3D renderings for both interior and exterior designs, helping you bring your architectural visions to life with stunning precision. With our support, you can be confident in receiving professional services at affordable prices, without the hassle of dealing with multiple vendors.
Getting an accurate architectural rendering quote has never been easier. Through our portal, you’ll have direct access to a streamlined process where we guide you step by step, ensuring all your needs are met. Our 3D rendering experts work closely with you to ensure the final product matches your expectations, whether it’s for residential, commercial, or mixed-use developments. Trust our platform to provide you with the best possible rates and results, all with a quick turnaround time and exceptional customer support.
