On Hackaday three years ago, architect Ekaggrat Singh Kalsi–a designer who also 3D prints with light–shared a robotic writing clock, also referred to as the Doodle Clock, that he has now updated and posted for all interested parties. The biggest improvement is with how time is marked by the clock.
There are several general improvements on this clock compared to the first one. The first version of the clock used a marker, which proved to be a problem since the marker would dry up after only 30 minutes of use. Then Ekaggrat got a good idea and substituted the marker for a magnetic doodling board inspired by the Fisher Price ones. In this case, he used 2 mm cylindrical magnets inside a solenoid (a coil wound up into a tightly packed helix) to write and then erase the time.
Another general improvement from the first prototype is that the second version has a much smoother and quieter sound since Ekaggrt used small gear steppers instead of servos this time around. All clock parts were designed and 3D printed. In addition to the 3D printed parts, the following components are also required to build this clock yourself: an artmega 644 p; two stepsticks; 1293dd; two 1:100 15mm stepper motors; two 12 x 18 mm solenoids; two 2mm diameter x 10mm magnets; and one ds1307.
This version of the clock has also gone through several prototype phases that Ekaggrat describes in his project log. For the first prototype, one motor was used on the base and one was mounted on the arm’s base driving the upper arm with a thin cable that kept slipping and the motors created backlash. On the second prototype, Ekaggrat replaced the cable with a connecting rod which eliminated the slipping cable problem, but there was still the problem of motor backlash.
Since prototype 2 is where Ekkagratt’s project log on his blog ends, we are left thinking that there’s another prototype to come, however, he doesn’t provide specific details about whether or not he ever tackled that motor backlash problem in the clock.
Other things we do know about the clock is that all parts are 3D printed, with the advice to 3D print with a .25 resolution, 50% infill and be ready up clean up holes before you assemble the clock. In addition to the Hackaday post, Ekaggrat has also posted files on Thingiverse, and quite a few people seem interested in trying this out for themselves. The clock has received 559 views and 64 downloads since it was posted last week.
Still a work in progress, the project has made great improvements and looks like its ready for you to try. As Ekaggart writes himself, the best part of it is “how mesmerizing it is to watch it” which is why he is striving to make it a perfected and practical desktop clock. You can see this for yourself in the video below, and discuss this design in the 3D Printed Doodle Clock forum thread on 3DPB.com.
If you're looking to get an architectural rendering quote in the USA, our service provides a simple and efficient process to obtain the best pricing tailored to your project. Through our platform, you can easily submit your project details and receive a competitive quote from our team of experts. We offer high-quality 3D renderings for both interior and exterior designs, helping you bring your architectural visions to life with stunning precision. With our support, you can be confident in receiving professional services at affordable prices, without the hassle of dealing with multiple vendors.
Getting an accurate architectural rendering quote has never been easier. Through our portal, you’ll have direct access to a streamlined process where we guide you step by step, ensuring all your needs are met. Our 3D rendering experts work closely with you to ensure the final product matches your expectations, whether it’s for residential, commercial, or mixed-use developments. Trust our platform to provide you with the best possible rates and results, all with a quick turnaround time and exceptional customer support.
